Contact Us

Jracking (China) Storage System

Add: Room 901, Tiyu Mansion, No.44 Gongyuan Road, Nanjing City, China

Contact us: Jiang Air

Phone: 86-13016972251

Tel: 86-25-69615810

Fax: 86-25-69615806

E-mail: export@jracking.com

Design Criteria Of Mezzanine

- Jan 10, 2019 -

1. Design standard

 

JB/T 5323-91 steel rack technical conditions;

 

ZBJ83015-89 code for design of high-rise warehouse;

 

Specification for design of FEM10.202 European material handling industry of steel racks;

 

2. Product features

 

Upright and H bracing, D bracing and the footplate are connected by bolts, bolts for high strength bolts 4.8 galvanized;

 

The whole beams punch forming, effectively prevent the severe impact, greatly improves the loading capacity;

 

The upright can be adjusted up and down according to the pitch. Each layer of the beam is equipped with safety pins, to prevent beam moving in work;

 

Molded by the factory by rolling, its rigidity, strength meets the standard of machinery industry;

 

3. Surface treatment

 

All the parts rack surfaces by cleaning and degreasing - after phosphating, then epoxy resin powder (Powder Coating), the thickness of the coating is 60~80 microns, and by a constant temperature of 180 DEG C, and use the 2H pencil test no scratches;

 

Electrostatic powder adhesion reached level 0 requirements in the GB92865-88 standard;

 

The hardness (wear resistance) is 100 times more than ordinary Xiaojiqi, reached 2 in the standard of GB6739-86 ii;

 

The corrosion resistance of GB1171-91 (hydrochloric acid experiment) is more than 500 hours.

 

4. Technical deviation

 

The upright bending error is less than 1/1000 or 10mm;

 

The upright and the installation of ground vertical deviation less than 1/1000 (ground roughness 1/1000);

 

The maximum load bearing measure deflection is less than 1/200;

 

The safety factor is not less than 1.65.

5. Strength instructions

 

The strength index profiles of the rack (N/mm2): tensile, compressive and flexural shear 205, 120, 310 end bearing;

 

The rack strength index (N/mm2): compressive weld butt weld tensile bending 120, 175, 120; weld compressive, tensile and bending 140.

 

6. Process

 

Production process: raw materials - cold rollingforming - length flat - punching (welding) - correction plane spraying packaging products

 

Jracking is specialized in producing various pallet rack, cantilever rack, electric mobile rack storage system, mezzanine and platform, shuttle rack storage system, push back rack, longspan rack, rivet rack, drive in rack, carton flow rack, stacking rack and other related storage equipment.


Jracking strictly implements ISO9001, FEM10.2.02, SEMA, and AS4084-1993 standard in all operations. Jracking offers a wide range of products to meet all of your order fulfillment & material handling needs: Teardrop pallet rack, Dexion pallet rack, European pallet rack and other Work Apparatus. Whether you are looking to populate an entire warehouse or you are in need of a single piece of equipment, Jracking has a solution for you.

www.jracking.com

Related News

Related Products

  • High Density Storage Drive in Rack
  • 76.2 Pitch Australian Standard Heavy Duty Pallet Rack
  • Industrial Outdoor Cantilever Racking
  • Heavy Duty Cantilever Racking System
  • Lumber and Pipe Storage Warehouse Heavy Duty Cantilever Rack
  • Medium Duty 55 Longspan Shelving